CAUTION: Under no circumstances should any major form of installation, repair,adjustment or maintenance be attempted by anyone other than qualified personnel


Site Details.


Site details for the machine should be entered in the test menu when installing the machine.


Physical Check.


Ensure that the machine is positioned on a level stable surface. Open the door and check that all parts are secure, electrical connectors are correctly mated and that no components or assemblies have been damaged in transit.


Internal Electrical Connectors.

Chat Now

When removing connections, pull on the connector and not the wires, when replacing connections ensure that the harness housing is being connected to the correct socket and the connector is correctly orientated using the polarizing pins and release catches.


Electrical Supply


WARNING: This Apparatus must be EARTHED.


Connect the machine to the mains supply ( 220/240V a.c 200 Watts) using an approved plug fitted with a 13 Amp Fuse (A minimum of 5 Amp can be fitted if required, Any value below this is not recommended die to Transformer surge current).


The Mains lead should be 3 core PVC insulated/PVC sheathed flexible cable (0.75 square mm csa) to British Standard BS6500.


The cable length should not exceed 2 meters


The Cable should be terminated with a straight IEC type mains socket (10A @250V)